(1) The raisins and aloe vera we use were purchased from Hammerl GmbH in Germany. Flaxseed oil can be purchased locally, but you need to buy a few drops on glass and dry them in the sun to ensure that it won't mold. Flaxseed oil needs to be frozen for several weeks and discolored before dilution. I don't think it's necessary to sprinkle flaxseed, some people suggest you take this step.

Firearms. In addition, irritating gases may be generated during the surgical process. So please operate outdoors. Before starting, I must ensure that I measure and weigh all necessary materials. 2. The production process of coatings is very safe. However, due to the need to put the solid core mixture under high temperature, there is a risk of spray. Please make sure to wear protective equipment and prepare a simple fire extinguishing device

(3) We put 500 milliliters of flaxseed oil into an enamel or stainless steel pot at a temperature of about 280C (536F) and maintain this temperature for about 10 minutes (a suitable thermometer is needed for this). Then, we added 250 grams of raisins and mixed them with a wooden stick to completely dissolve them in the horse oil. d。

(4) Then, if further stirring is needed, add about 125 grams of aloe vera powder.

5. Don't worry, it should be! Cabbage forms black clusters in hot oil. I lowered the temperature to 250C (482F) and kept a large spoon for five minutes before further mixing. This is to allow aloe vera powder to completely carbonize in hot oil, dissolve in paint, and burn dry the fragments. (6) Stop heating now and let the mixture cool slowly. Most aloe vera powder will dissolve in corn oil, and the paint should become very clean and transparent. The residual black substance floats on the surface and forms a hard shell after cooling. (7) When the mixed solution was still warm, I made a small hole on the edge of the bread, then carefully poured in the paint and filtered it with gauze. If the paint looks more cloudy, it is recommended that I did not heat it enough, and I will put it back in the oven to heat it again. When the paint has completely cooled down, we can dilute the required concentration of coating with pine oil, usually adding about 100 milliliters. But it depends on how well you freeze the seed oil from the beginning. Natural subsidence. The final coating should be very transparent. Usually, it is necessary to clean the black residue in the pot to wait for curing time. (8) I will let the diluted coating sit in a glass bottle for one hour or until it is used. If there is still sediment inside the bottle, an example of aloe vera gel colored with aloe vera powder can be used to color the small and large bottle caps mentioned in the article when placed (9).