The preparation method and process of violin wax coil paint require a lot of information input, but in reality, the structure of the small purple resonance box is different. The refined materials and manufacturing methods are different, and different color textures must be selected. The brightness and transparency of the paint are inherently related to the sound of the violin and must be considered when making the violin. They have done a lot of work both domestically and internationally. Explore violin colors. Using a single paint method cannot compensate for defective sound. Therefore, a combination of a good white violin without paint holes may not be a perfect instrument.

Since the reform and opening up, the level of China's manufacturing industry has rapidly improved. From the perspective of the general production process, the imbalance of paint is particularly evident. Therefore, it is hoped that we will not be satisfied with the current situation and do more work in the area of purple paint. Purple paint has special materials and formulas. Nowadays, people use wood paint to apply purple wood paint, which is fundamentally different from purple paint. Wood paint only has a protective effect. Not considering the impact of vibration. If you use wooden tools to paint, experienced people will find that the paint has very fine powder in the final radiance, indicating that the wood paint is too hard and the sound of the violin does not work well. The sound of a violin made of wood is very tiring, the sound cannot be produced, and the volume is very small. Therefore, some manufacturers reduce the thickness of the sheet metal and increase its arch shape. The sound becomes more boring after the wood is painted. You can hear it nearby, but not in the distance, and there is no explosion of sweat. In this way, a soft brush can have a good effect.

After years of research, I have found some better gourd lacquer materials for violin lacquer. There are two types of gourd paint materials: one for liquid materials and the other for solid materials. Liquid materials include castor oil, flaxseed oil, cottonseed oil, peanut oil, and these corn based liquids have different characteristics; There are semi dry and non dry oils with different degrees of dryness. Heating by fire. Because flax bacterial oil will not be directly heated to 300C, heating for 6 hours is the most suitable. Accelerated drying, generally speaking, it can dry after 24 hours. The slowest way of heating is through natural oxidation, as oil is a dry substance that can dissolve in ethanol and pine oil. And insulation heating can oxidize flaxseed oil. There are three methods for flaxseed oil, one is to directly oxidize it with natural gas. Flaxseed oil dissolves faster in paint and can be directly dissolved in ethanol and pine oil.

Cotton seed oil is a semi dry oil, and natural oxidation is the best. It has a good heat insulation effect because of its low boiling point and easy ignition. Castor oil is rare in the market and belongs to the category of semi dry