neckIt is obviously much more convenient to process all aspects of the neck before inlaying it to near completion, rather than processing it later. Before sticking the fingerboard,
The function of violin edge lines (black and white lines) is not only to enhance the beauty of the violin, but also to cut off the top wire around the edge of the violin. The glued
The violin horn is divided into two parts, divided by the bridge. The upper part of the bridge belongs to the small head part, and the lower part belongs to the large head part. Th
According to the method of making the piano board first and then assembling it, both the inside and outside of the panel and backboard have been processed, leaving only the edges o
What is Purwing? Thread inlay is a process of carving grooves on the inner edges of the violin panel and backboard, and then using black and white wooden strips, sticking them toge
Tomaso Antonio Vitali (1663-1745), from Italy, was a Baroque musician of the same period, including composers such as Antonio Vivaldi (1678-1741), George Frideric Handel (1685-1759
Marco Uccellini (1603-1680) was born into a noble family in Fulinpopoli, northeastern Italy. The family owned land in the area since the early 14th century and many members held re
There are two types of violin E-string tuning styles, called Loop End and Ball End. Loop End is also known as hooked. These two styles of string tails correspond to two different v
1、 Technical Level of Work2、 Accessories Set Up3、 Quality of Varnish lacquer4、 Overall Style and Character5、 Quality of Timber6、 Strength of Tone7、 Balance Between Strings8、 Playab
The main problem with this outdated design is:1) The pitch changed by twisting the string axis is very wide, making it difficult for beginners to easily adjust to the ideal pitch.2
